WikiSponsors
HCL/Laptops/IBM
tagline: De openSUSE
| Lista de compatibilidades de Hardware - Portátiles Acer - Apple - Asus - Compaq - Dell - Digital - ECS - Fujitsu - Gateway - Hitachi - Higrade - HP - IBM/Lenovo - Medion - Micron - Mitac - Mitsubishi - NEC - Panasonic - Samsung - Sony - Toshiba - Zenith - Other |
| Leyenda: |  Funciona |
No funciona|| |
| Modelo | SUSE Linux versión |
Soporte Hardware | Observaciones: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vídeo | Sonido | Ethernet | Wireless | Bluetooth | Gestión de energía |
Otros | |||
| A30 | 10.2 | |
|
|
|
|
|
acpi e Irda funcionando, modem interno encontrado pero no es seguro que funcione. D-Link Wireless PCMCIA card encontrada pero sin funcionar | |
| A31p | 9.3 / 10.0 | |
|
|
|
|
|
Modem interno e Irda funcionando | |
| R30 | 10.0 | |
|
|
|
|
|
Modem interno sin funcionar. Problemas con la suspensión. Sin chequear la conexión externa a vídeo | |
| R32 | 10.0 | |
|
|
|
|
|
||
| R40 | SLED10 | |
|
|
|
|
|
||
| R51 | 10.0 | |
|
|
|
|
|
Conexión externa de vídeo sin funcionar correctament (OK en modo clónico). Suspensión-a-RAM consume demasiada energía bajo ACPI | |
| R51 | 10.1 | |
|
|
|
|
|
Probar a presionar los botones de hardware si el sonido no funciona correctamente ;-) | |
| R51 | 10.2 | |
|
|
|
|
|
Suspensión-a-RAM necesita trucos de configuración para gestionar bien la energía | |
| R52 | 10.1 | |
|
|
|
|
|
Vídeo requiere descargar del sitio de ATI, ver HOWTO | |
| R60 | 10.2 | |
|
|
|
|
|
Vídeo Bios requiere configuración con 915resolution | |
| T21 | 10.2 | |
|
|
|
|
|
El modem interno no funciona, las teclas thinkpad no funcionan y la tarjeta PCMCIA puede dar problemas por lo que yo tuve que añadir "exclude irq 3" en /etc/pcmcia/config.opts para evitar un conflicto irq 3 durante el install/boot con tarjetas de 16 bit | |
| T22 | 9.3 / 10.0 final | |
|
|
|
|
|
El modem interno no funciona | |
| T23 | 10.0 RC1 | |
|
|
|
||||
| T30 | 10.0 | |
|
|
|
May lock up if Ultra Bay is hot-swaped without Thinkpad management. Had funny DHCP issues, would not resolve name server, but don't believe that's hardware based. | |||
| T40 | 9.3 / 10.0 RC1 | |
|
|
|
|
apm OK / acpi works, but consumes too much power in suspend2ram |
||
| T41 | 9.3,10.0,10.1 | |
|
|
|
|
apm OK / acpi works |
||
| T40p | 9.3,10.1 | |
|
|
|
|
|
||
| T41p | 9.3/10.0/10.1/10.2 | |
|
|
|
|
for suspend see /usr/share/doc/packages/ powersave/README.suspend2ram |
||
| T42 | 9.2,10.0,10.1,10.2 | |
|
|
|
|
|
Added ww2.ati.com/suse/10.2/ installation source for fglrx 8.33 for M10 9600. Have Beryl Xgl working with final xorg 7.2. Suspend to Ram works and finally does not show video corruption at the top of the display upon resume. Bluetooth works fine. Didn't need to configure nvram on OpenSuse 10.2. | |
| T42p | 10.0 beta2 | |
|
|
you need kernel-default-nongpl that is not provided | |
|
Numlock does currently not work within X. This is a minor issue and should be fixed with beta3. | |
| T43 | 10.0 RC1 | |
|
|
copy firmware ipw2200 into /lib/firmware | not tested | |
Installing Linux failed initially since resizing of ntfs partition failed - after complete new installation of Windows XP with IBM recovery CDs and resizing of the ntfs everything worked. Tip: Burn recovery CDs first and don't install grub into the MBR since you'll loose the IBM recovery key function (cf. SuSE Linux & T43) | |
| T43-2668 | 10.0 | |
|
|
|
|
|
Internal modem doesn't work with the default driver, look at http://www.linuxant.com/drivers/ | |
| T60 | 10.1/10.2 | need to install ATI Driver. Straight foward procedure |
|
|
make sure all ipw3945 drivers & firmware (esp. non-oss) selected during install. Otherwise, post install ipw-firmware and ipw3945d packages from non-oss repository or Extras CD. Also, be sure the wireless kill switch is not turned off, it is near the IR port. |
10.2 worked fine |
|
Will try setting up fingerprint login. Tried installing Suse 9.3: didn't recognise HD. Advanced mini-dock seems to work well (tested parallel, USB, & DVI-D ports). For more on ATI drivers, see ATI driver How-To page for SuSE specific instructions. http://thinkwiki.org/wiki/Installing_opensuse_10.2_on_a_ThinkPad_T60 | |
| T60p | SLED10, 10.2 | only vesa or install the ATI Driver. |
|
|
make sure all ipw3945 drivers & firmware (esp. non-oss) selected during install |
|
|
Note for openSUSE 10.2: You need at least fglrx 8.32 driver to make it work with xorg 7.2 | |
| X30 | 10.2 | |
|
|
|
|
suspend-to-{disk/ram} both work |
||
| X40 | 9.3 / 10.0 | to activate external video, use cloning or use the development driver from fairlite |
|
|
|
|
for suspend in 9.3 see /usr/share/doc/packages/ powersave/README.suspend2ram |
SD Slot not working by default, alpha state kernel patches that have been tested on this laptop are available on http://mmc.drzeus.cx/wiki/Linux/Drivers/sdhci, IR not working | |
| X60 | 10.2 | |
|
|
|
|
|
Installation report | |
| Z61m | SLED10 | |
|
|
|
|
|
Advanced mini-dock seems to work well (tested parallel, USB, & DVI-D ports). Upgrade process during install handles video drivers for enabling XGL. Slowness issues make this laptop unusable for long term work. | |
| 390X-2626 | 10.0 | |
|
|
|
|
|
pentium 2, tested with 128 MB | |
| 600 E | 9.2/9.3/10.0/10.1 | |
|
|
|
|
|
APM OK, ACPI not supported by BIOS. Sound requires manual config. Best to have a small dos partition so you can use the IBM dos tools to configure hardware. | |
| 600X | 10.1 | Had to select display by hand in SaX after killing X11 repeatedly, also TrackPoint mouse |
|
worked with Netgear FA410TX |
IBM High-Rate Wireless LAN PC (PCMCIA) card works and was configured by YAST to use Orinoco_cs driver |
|
|
Did network install of 10.1 thru netgear card, upgrading from purchased 9.0. | |
| G40 | 10.0 | |
|
|
|
|
|
Some versions of G40 don't contain wireless network. | |
| Thinkpad 770E | 10.2 | |
|
Using PCMCIA CNet SinglePoint 10/100 |
|
|
|
P233MMX, 96MB RAM, 4GB HDD, 1024x768x16-bit | Installation was painfully slow - over 24 hours, including updates via broadband. Resultant system is significantly slower than original Windows 2000. |
| Lenovo 3000 N100 | 10.1 / 10.2 | |
external speakers not working |
|
|
|
|
Ethernet auto-mdi/mdix does not work | |